Wireless

One of our sites currently has two 6500's and 4 WiSM blades. Our Wireless Vlans are using /22 subnets with plenty of room.We now have a newly constructed building connected physically to the site. It will also have two 6500's that will be tethered ...

Hi Lads, Just learning about PEAP and EAP_TLS and have a question. After the authentication is complete with the certificate and the encryption , how is the traffic after the authentication handled from the point of view of encryption , So after I'm...

Hi-When I installed WCS, I just left the default TFTP directory configured for the root of the installation drive, but wish to create a folder for things that go in there, such as location server backups. Anyone know how to change that directory?Than...

I'm a first-timer LAP/WLC guy. My LAP is on a remote switch from the ISR with the WLC-NM. I have my DHCP pool set up on the ISR with option 43 pointing to the WLC management IP address. The AP recieves an address and can ping the WLC management inter...

Who if anyone here is using the Ekahau location engine and tags with the Airespace product? Specifically who is using the T301 tags? I am having some issues with them updating and wanted to talk to someone about this.

I want to take the advantage of WDS. I have around 10 APs, 1 ACS, and 1 WLSE. May I know if the WLSM is a must?

Did anyone configure LWAPP AP1242 for Workgroup Bridge Mode? I am going to upgrade existing IOS AP's including Workgroup Bridges to LWAPP. I like to have workgroup bridge using two LWAPP 1242 AP's, one for root and other for workgroup bridge as I d...

Let say there are currently 5 user connected to a cisco 802.11b/g capable ap using the x.11g(54mbps) and if a user whose hardware only can support x.11b(11mbps). By that using conneting thru .11b will the rest of the 5 users whose speed is 54mbps be ...

We just installed WCS, 2 WLC 4402's with 29 1131 AP's. I have a user who is half way between 2 AP's. He keeps bouncing between the 2 AP's and gets a pop up message each time he does. He has an IBM T43 with a built in wireless card. How can I keep him...

4402 Wireless LAN Controller. Want to connect it to 2 different switches for redundancy and run STP on it. What is the recommended STP mode, Fast or 802.1D? Does Fast mean behaviour like PortFast or behaviour like Rapid STP?

I have about 25 1231 APs that are getting output errors and interface resets on their radio interfaces. This is causing my wireless IP phones to randomly drop calls. Does anyone know why my radios seem to get these output errors and what I might be...

Hi all,I'm currently using 1100 & 1200 series b/g AP at our company. How can i configure 1100 series AP with repeater mode? Root AP will be a 1200 series. Cisco's documents did'nt help my issue.Thanks.