Wireless

What additional equipment/apps do I need to acquire/install in order to use 7921G phone with my commercial VoIP provider - broadvoice. It looks like I can easily connect this baby to my Aironet AP-1231 wireless access point. Will I be able to just se...

Hi everybody!I've a problem with my WLC. On the first web page ( Monitor -> Summary ), the clients summary is correct.But if I go to Monitor -> 802.11b/g and then click on detail for any AP it report an invalid user count ( sometimes 190 users associ...

I have been looking at the LWAPPs and was curious if manual RF management is possible? I ask because i am concerned about the possibility of an automatic process extending a cell to the outside of my physical facility. I am not by any means referring...

I need to connect a lab of 24 wireless computers to a LAN. I need to be able to login to a Novell server, obtain a DHCP address from the Novell server and have Internet access. The site is setup with a VLAN. The WAP will be in the same room so ran...

We are using 3560 POE switches to power Symbol AP's. All the documentation I've read says the 3560 can power up to 24 AP's. We are only able to plug in 7 to 8 AP's before some start dropping out. Is there any other possible cause for this other th...

Hi,I?ve installed a AIR-AP1231G-A-K9 to substitute an old 1220 (I need to connect some 811g clients).Now all clients (Cisco, Linksys and D-link) reconnect to this new AP, except a 1231 (AIR-AP1231G-E-K9) configured as WGB which turned OFF it?s radio ...

Hi,Our Church has a Conference center that is in the Mountains, a very remote location with many trees. We have Internet over Satellite and need to connect 2 other remote buildings to the Internet connection. The maximum distance for Bldg1 is appro...

I have a problem with getting SSID and local vlans to work unless I create subinterfaces on radio interface. If the VLAN is then associated to a VRF and VRF DHCP pool I won?t get an IP over WLAN.Has anyone experience with such a solution with the int...

Am just getting ready to plunge into 802.1x, with Cisco ACS and mostly Windows users and we have to accomodate lots of different cards, etc. PEAP looks best for us- but I'm seeing conflicting stories on PEAP and roaming- Cisco doc on FAst Secure Roam...

Hello,I have a site with wireless roaming printers that have static ip addresses and can roam throughout the building. Several times an hour the print server (in another building / subnet) cannot ping the printer therefore cannot send its print job....

I am trying to connect a Aironet 1242 LWAPP AP to a Cisco 3524 non POE switch.For some reason I cannot access the power settings for the APs.What I do is ,got toConfigure ->Access points and slect the AP.My gut feeling is that I should modify the po...

Hi all, We are configuring the WLC for MAC filtering via a freeradius server. When a client pc wants to authenticate through the WLC with the freeradius server,a shared secret is being transferred (configured in the WLC as ?radius server configuratio...

Here is the error that I am getting when I boot my WLAN Controller:ooting Primary Image...Press <ESC> now for additional boot options...Detecting hardware . . . .^[Cisco is a trademark of Cisco Systems, Inc.Software Copyright Cisco Systems, Inc. All ...

I am configuring an AP to be the WDS device for a group of AP's in a building. I am doing this so I can configure fast reassociation for time sensitive applicaitons. I am curious what happends if the WDS AP goes down....do the RF clients simply loos...