Wireless

how do you reset password on the 1130 ?

HiI need the feature when the ethernet interface goes down the radio interface is shut down. within the br1300 in the AP mode it works but not in Bridge mode!!!WHY??? in br350 it also was integrated!the problem is when you have a wlan site with 2 BR1...

I just received this, and I am not able to interface with the box.Any suggestions?

Hi,I am in the planning stages of deploying a wireless solution to my company. We have 2 WLC 4402 at our disposal plus 20 LWAPP AP's.The requirements are to enable normal corp access for corporate employees using Windows XP and MAC's via 1 WLAN, and...

When connecting a WLC4402 directly to a switch, is a straight thru cable or crossover required?

HiI am attempting to configure 2 Cisco Aironet 1200 series devices for conection to an existing WLAN. Neither AP will be the Radius server. I am able to connect to the device using IE and the IP address - however - as soon as I make any changes in a...

Hi Netpros,I have a situation where 5 APs which are managed by Cisco WLSE are showing some output errors and interface resets on its radio interfaces and this seems to be causing connection drop outs and also slow transfers. I am currently investigat...

I have two WLSE 2.12 1130's, just got the second one for redundancy. Seems like it should be a simple process to create the redundancy, and initially all seems well, but a few hours after the redundancy is built, get all kinds of messages that the bo...

Hi, I'm after some good old help & advice on wireless configuration issue we have. We are currently looking at a wireless solution for our HO site. We have purchased 5 x 1131AG AP's, 1 x 4402 WLC.We are struggling to get the concept of the number o...

Is anyone having any problems with this combination ? Our initial deployment (10+) of 7920's (spring/summmer 2006) yielded no significant problems. Hdwe version 1 or 2, firmware and phone load unknown.Nov/Dec 06 -- we have deployed large numbers (9...

Hopefully someone here can clarify this for me:I'm a little confused about what is meant by antenna orientation when using the 1242 with ANT 4941 in wcs.As it is an omni antenna is the orientation the direction a certain part of the antenna is facing...

My boss wants to provide internet wireless capability to service customers while they are waiting. We have a small LAN with forty workstations and only one port on our router to the outside. I am worried about security. I was thinking of putting a ...