Wireless

I am using the AIR-CB21AG card in an XP laptop, I am authenticating to the AP using WPA-PSK with AES encryption.Everything works fine, however after approx 12 hours the card seems to un-associate from the AP and just says 'authenticating'. If I re-se...

Good Day, Checked the manuals and forum to no avail.My Cisco 1200 AP is displaying Signal Strength (dBm) but not Signal Quality (%).Is there something I need to do to enable this, or is it client specific? Thanks for the help!

Hi Sir,This is a very simple question but I have to ask.Is WiSM supported on a Catalyst 6500 box in Hybrid mode, i.e. CatOS on the Supervisor Engine and Cisco IOS on the MSFC? I've seen the WiSM config guide which shows the configuration in Native IO...

I have converted Aironet 350 access point from VXWorks to IOS. The current image is 12.2(13)JA1I am trying to upgrade the IOS image to "c350-k9w7-tar.123-8.JA.tar" thru web browser. But during upgrade I get the error message "The software upgrade was...

Hello,Im currenlty experiencing problems about authentication between WLSE and WDS.I have already successfullu deployed the WDS on several networks. WDS is correctly authenticated:- WLCCP credentials are correct - the "SECURITY KEYS SETUP" message ap...

The following text represents my perspective. I now face a complicated situation about the implications of design issues using features dependent on Mobility Groups. If someone can provide an experienced-based explanation please chime in. PLEASE DON'...

Hi,I have a simple configuration. An ADSL modem and an access point that acts as a dhcp server for the wireless clients. The problem is that the access point does not advertise the dns servers that are configured at the adsl modem to wireless clients...

Hey all, I have recently been given the opportunity to provide a wireless network solution to a 3 adjacent condos. As condos at a beach go, they are composed of 99% concrete and glass. My ability to run cable is extremely limited as every cubic cen...

I am trying to set up a 1231G to allow normal users to connect using WEP and visitors to connect with no encryption in guest mode. Using one SSID, I can get one or the other to work using the guest-mode command on the SSID, but have the problem that...

Some questions about encryption when using a Cisco 2006 WLC and AP1030- When using WEP, TKIP or AES encryption and LWAPP layer 3 mode, , are the packets always encrypted all the way from the AP to the controller?- When configuring WPA (TKIP encryptio...

Hi Folks,I would like to know if the Cisco Wireless Location Appliance 2710 can support non Cisco Wireless LAN controllers and APs. We have a requirement to manage the strix wireless APs and LAN controllers i would appreciate if you guys can tell me ...

We are currently planning to deploy Cisco 4400 Wireless LAN Controllers using LWAAP with Cisco 1000 APs. Is there a limit to the number of users that can connect to one AP ? If you have an auditorium for example that can hold 400 people would it be...

Dear all,i am desgining now a unified WLAN soluiotn for a university.i am proposing Cisco 1242 LWAPP Access Points with 4400 Wireless LAN Controller.For authentication, do I need Cisco Access Conrol Server or Wireless LAN Controller already has built...