Wireless

I'm trying to use the ACU site survey tools to map out some locations. I'm using a 350 and ACU 6 connecting to a 1220 802.11b AP. I've got a PIII 450 IBM laptop running XP. My AP is set for 1 = basic, 2 = basic, 5.5 = yes, 11 = yesMy problem -- no...

We have several APs in an environment. Users are associating with APs that are not the closest AP. What determines which AP a user will associate to? And why will that user stay connected to an AP that he is getting "poor" to no signal strength, inst...

Hi all,Recently whenever i ping my 10KM bridge to bridge connection, i get very high treturn time. The normal time I used to get was <10ms. It is now common to get 2100ms return time. This will continue for some minutes before it drops back to <10ms ...

I'm wondering what the best settings are for a 1200 Access point when used in a Hot Spot application. Specifically, I'm wanting to maximize compatiblity with the broadest range of 3rd party client cards.Has anyone had real-world experience testing 1...

Hi,Cisco made the acces-list available but they did not explained it in the manual. I need to disable a filter and I don't know how since the web browser interface is not working because of the filter.Do you know how the access-list works for the AP ...

Is the "multiple SSID" feature of the 1200 access points compatible with non-cisco 802.11 cards? I put in multiple SSIDs on a 1200 AP with a &b radios, and my Cisco 351 card was able to associate just fine to any of the SSIDs. However, with a netge...

I would like to know if freeradius implementation version 0.8-2 supports LEAP. If yes, does anybody know of any documents to configure this on freeradius?Thaks

Greetings,I was wondering if anyone had some ideas for configuring additional security on a 7200 synchronous serial interface other than access-lists when dialing in with a modem. I would like to know if its possible to be asked for a username and pa...

Under investigating the wireless architecture for large hospital, but I don¡¦t have much knowledge about medical environments. Can anyone give some suggestion or provide information about anything should be specially taken care in this critical case....

I have installed 4 BR350 bridges at a customer site. All works well except for two of the bridges. These bridges keep going down every 5 to 10 miniutes with an event in the log "Lost Authentication with Parent" on the parent bridge I get a message ...

I have created a vlan comprised of the switch ports that attach a wireless access point to the Ethernet net. Laptops, (most of them using an Aironet 350 NIC) can get a DHCP address from the server but Symbol RF units cannot. I have temporarily resolv...

Hi all,I took a 1220 that was running Vxworks and upgraded to IOS last night. The upgrade went fine, however afterwards I wasn't able to authenticate to our IAS server using PEAP with MD5. I did an erase start and tried everything from scratch (also...

Building A (the root building) currently has an AP, building B has a WGB, building C is under construction. Can I replace the AP in building A with a BR and buy a BR for building C and expect it all to work?

Does Cisco have a case study on MMDS ? I'm particulary interested in services of video (CATV channels), voice and data running on a fixed wireless infrastructure in 2.5-2.7 GHz spectrum.thanks