Wireless

I have a pair of ISA-342 client adapters, and can't get either card to work in any of my NT machines. The cards work fine in Win98 and 2000.(as pnp) I have tried various IRQ and address settings. I found info that said the drivers on the supplied CD ...

I have a customer (municipal Police Dept) that needs to deploy a wide-are wireless network over the city. They want to link the police cars back to a central data center. The wired network (ATM) will be supplied by others, and router, switches, etc...

Hi, I've been involved with networking for a lot of years but this is my first venture into the wireless stuff. I'm hoping I can get pointed in the right direction.1) For longer distances which bridge is preferred the 350 or 340?1) If all I really ne...

I was trying to find out who has the best U-NII radio for the 2710 series and is their a road map.

I have some basic questions about the 340 and 350 series that I was hoping to get answered:1) When I look at the results of the linktest I get signal strength in dBm in % and I get quality in %. I understand what strength in dBm, I want to know when...

HiOne of the new AP350 which I got recently (for demopurpose) does not show up the Root Unit (or) Wireless Repeater mode in the Role in Radio Network option.I tried upgrading the firmware to 11.10T, but stillthe problem persists.Aironet 350 Series Cl...

When you insert a PCMCIA card into a handheld device, how does the PCMCIA transmit data on the physical layer? Does it have an antenna? Or is something else at work?

Hi I installed 4 340 Wireless Bridge for remote network access.Two is connected via yagi antennas between 0.5 miles distance and one of these bridges in located in a tower and connected to another 340 Wireless Bridge via a hub and these brigge is con...

The 340 Base Station documents indicate use of NATwhen connected to DSL/Cable. I assume it is usingPAT (as opposed to NAT) as I did not see anydocumentation implementing static/conduit/ACLsimilar to a PIX.The concern is: Does this unit have any capa...

I have two networks connected via an Access Point and a WGBridge. I can ping from both sides to any PC or server I care to. I can not transfer WINS information, I have placed LMHost files on both sides and still can not browse. HELP!

I'm having problem with the above configuration, has anybody encountered this problem?

I have a customer that will install some units of AP350 and PSC Falcon 335 Cisco Radio (Data Capture). The question is:The customer wants to avoid that someone using a notebook (for instance) and a card radio can access the network without permission...

Hi I installed 4 340 Wireless Bridge for remote network access.Two is connected via yagi antennas between 0.5 miles distance and one of these bridges in located in a tower and connected to another 340 Wireless Bridge via a hub and these brigge is con...

any possibility using the br350 in a point to multi-point application? if so do you any recommendations, successes or failures? Here's the situation - I'm looking at connecting 8 remote sites, ranging from .5 miles - 4 miles back to a HQ (headqarters...

hi, i would like to know when will cisco be releasing their IEEE802.11a products...i'm interested in purchasing IEEE802.11a soon for my university when available...please do inform me as soon as possible...thank you