I am trying to establish a console connection with an ASR9000V for initial configuration. I have obtained a USB->MicroUSB console cable and have downloaded the usbconsole_3.1 drivers from the Cisco website. After installing the driver and then pluggi...
Forum Posts
Community (will rate), We are encountering a situation where a client in a remote location (several hours away) disconnects from an AP in flex connect mode, and travels to another office with AP's in local mode. When the client attempts to connect...
Resolved! Office Extend AP and external addresses
Hi I have just configured a WLC with some SSIDs and 5 internal Access Points. Everything is working and my clients are able to connect to the network. I have then connected a 1810W OEAP using this guide: https://www.cisco.com/c/en/us/td/docs/wirele...
Hi There, I´m trying to setup a Cisco 1700 Series as Autonomous connected to a WLC 8500 Series. The question is: - I have a WLC 8500 Series with a SSID "PROD' setup to broadcast the signa but no DHCP, we define to use static IP address in the cl...
Im Running a Pair of 8510's in seperate data centers with Code Ver 8.2.167, and roughly 3,500 2702i APs. Im trying to manage the N+1 Failover Priority setting on the APs and I don't see any option for that in Prime Infra 3.4 Lightweight AP config...
Cisco's Wireless Configuration Analyzer is telling me this: "Security: It is recommended to monitor all channels for rogue detection. Band(s): 2.4GHz,5GHz". Cisco's document "Rogue AP Detection under Unified Wireless Networks" says to control thi...
Hello, We configured the WIPS as per below document with MSE 8.x, Prime 3.1 and Access points in monitor mode https://www.cisco.com/c/en/us/td/docs/wireless/technology/wips/deployment/guide/WiPS_deployment_guide.html We are receiving the alerts f...
After we upgraded WLC from rel 8.2 to 8.5 we had a bunch of WiFi printers not able to associate anymore to our Cisco APs.Seeing that these printer are very important for the production flow, we had to perform a downgrade to the previous rele...
Hi all, does any one could advise me on how to do configuration of Cisco WLC 2504 and Cisco AP 1832 to provide user both laptop and mobile phone( IOS and Android)to connect to Canon Wifi printer MG4100 Series by name searching setup ( not setup man...
Hey, How to view IP addresses of joined clients and access points in WLC ? Is there any way ?
Hi. Is it possible to use for example 3504 as primary and 5508 as secondary controller? Will the APs fail over to 5508 in case the 3504 is not responding? Are the licensing models compatible? Any advice is greatly appreciated.
I'm pulling my hair out, so I have 2 - 2802E's. I flashed the first one with the Cisco ME firmware 8.8.100 It's fully configured working fine. I bring up the second unit it finds the controller works fine as a CAPWAP downloads the latest firmware fr...
Hi All , i have 2504 WLC and Cisco 2800 Series AP ,connected with WS-C2960-24PC-S. AP is completing the Botting Process , Get registered on the WLC but i can not see any SSID brodcast . on AP consol i am seeing Error : Radio1 not started, not enou...
Resolved! 5508 WLC in HA/SSO upgrade path
I have my 5508's in a HA/SSO pair and am being faced with an upgrade from 8.3.135.0 to 8.3.140.0. Does the upgrade occur with NO network downtime, or do I need to plan an outage?The upgrade document doesn't cover any HA deployments.Roughly 350 WAP on...
Hello, We're having a weird issue that I hope someone here can shed light on. On several of our 4500 VSS pairs of distribution switches we've observed this type of log message every 6 hours: Oct 28 11:15:06.463 EDT: %C4K_L2MAN-6-INVALIDSOURCEADDRES...
