Filter Client Association According to MAC on AP Cisco AIR-AP1231G-E-K9

[leofers78]

Hello I have an AP with two SSIDs each in a different VLAN and I want to filter the associations to one of the SSIDs by the clients mac, I have seen many solutions on the WEB but I have not achieved what I want, the only one I could Is to filter all connections to the radio without differentiating the SSID via ACL and the command dot11 association mac-list 700 but it is not what I want.

I have also tried to associate filters with the Ethernet subinterfaces of each VLAN but the clients can be associated with the SSIDs.

In summary I have tried the following:

Dot11 association mac-list 700 (Filters all SSIDs)

Access-list 700 permit xxxx.xxxx.xxxx 0000.0000.0000
Access-list 700 deny 0000.0000.0000 ffff.ffff.ffff

Ethernet 0
L2-filter bridge-group-acl - Does not Work

Ethernet0.6
Bridge-group 6 input-address-list 700 Does Not Work
Bridge-group 6 output-address-list 700 Does Not Work

How can I achieve what I want?