01-13-2013 08:58 AM - edited 07-03-2021 11:20 PM
HI
We have two WDS IWireless Domain Services) in our network.One of the WDS went faulty yesterday and we have replaced it today.Everything is working fine but i have a small query .All the access points are showing registered including WDS in other WDS when i run the command show wlccp wds ap
but on the replaced WDS , all access points are showing registered except itself when running the same command.Below is the screen shot from both WDS..What is imapct of this thing...
GGN_DLF_AP5 0012.7fe7.b9b1 58.2.37.207 REGISTERED
GGN_DLF_WDS_02 0012.7fe7.b9b7 58.2.37.196 REGISTERED >>>>>WDS itself showing registered in one WDS
GGN_DLF_AP20 0012.7fdc.0948 58.2.37.209 REGISTERED
on other WDS ,WDS is not showing registered..
GGN_DLF_AP24 0012.7fe4.acda 58.2.37.158 REGISTERED
GGN_DLF_AP7 0012.7fdc.095c 58.2.37.141 REGISTERED
GGN_DLF_AP43 0012.7fdc.095e 58.2.37.177 REGISTERED
So just want to know whether it should be registered or not ?
01-13-2013 09:12 AM
Hi,
Same wlccp config in both WDSs?
They are added to the same RADIUS server? Or they use local radius feature?
Sent from Cisco Technical Support iPad App
01-13-2013 08:53 PM
yes both WDS have same configuration except the IP address.
Both are added in RADIUS server.
01-14-2013 01:38 AM
Hi, Punit,
Normally, you should have WDS to be registered to itself.
wlccp ap username GGN_DLF_WDS_02 password
seems to be missing.
Thanks, Irina
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide