09-27-2023 07:33 PM
1. What is the current purpose (A) of C9115AXI-K?
2. Is there a difference between booting the AP and using it normally (assuming resource usage at 50%)?
2-1. If there is a difference, how much is A for each?
3. Can the difference in current consumption between one unit and multiple units (140 units) be multiplied by 140?
If you know, please reply.
thank you
10-01-2023 10:44 AM
As per https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9100ax-access-points/datasheet-c78-741988.html#Productspecifications the specified power requirement is 20.4W
In reality this is what a 9115AXI running 17.9.4 software is consuming:
From CDP:
Power drawn: 18.900 Watts
Power request levels are:18900 15400 0 0 0
From switch inline power management:
Power drawn from the source: 18.9
Power available to the device: 18.9
Actual consumption
Measured at the port: 6.2
Maximum Power drawn by the device since powered on: 8.9
For the purposes of power budget you should assume 20.4W x 140.
10-01-2023 02:01 PM
Nearly the same as mine, it's using 7W on the switch port. But this is with very low utilisation.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide