Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Activate license for CGN NAT

Hi all.

I have one question, how can activate license for CGN in CRS-3.

I testing whit this command.

RP/0/RP0/CPU0:(admin-config)#license XC-XLAT44-5M location 0/3/CPU0

In linecard 0/3/CPU0 is my CGN NAT, after of config  RP/0/RP0/CPU0:(admin-config)#license XC-XLAT44-5M location 0/3/CPU0

I no see change.

RP/0/RP0/CPU0:#sh license                       

Sat Dec 14 12:08:05.066 SCL

FeatureID: CRS-MSC-40G-IMP (Slot based, Implicit[Remaining time: unlimited]) 

  Total licenses 3

  Available for use         0

  Allocated to location     1

  Active                    2

  Store name             Permanent

  Store index               0

    Pool: Owner

      Total licenses in pool: 3

      Status: Available     0    Operational:    3

      Locations with licenses: (Active/Allocated) [SDR]

              0/5/CPU0        (1/0) [Owner]

              0/4/CPU0        (0/1) [Owner]

             0/3/CPU0        (1/0) [Owner]

FeatureID: XC-XLAT44-5M (Slot based, Permanent) 

  Total licenses 1

  Available for use         1

  Allocated to location     0

  Active                    0

  Store name             Permanent

  Store index               1

    Pool: Owner

      Total licenses in pool: 1

      Status: Available     1    Operational:    0

I see that no activate.

somebody know this problem.

Thank

Ruben.

  • XR OS and Platforms
Everyone's tags (1)
7 REPLIES
Cisco Employee

Activate license for CGN NAT

Hello Ruben,

Is the CGN NAT configured and running already? License will be allocated and active once the feature is configured and running. Not sure with CGN NAT, but should be the same behavior I think.

regards,

rivalino

New Member

Re: Activate license for CGN NAT

Hi Rivalino, I test with you say, but no see change in show.

my test.

ping from Edge to Internet (Edge-Core-Crs) ---->

the NAT is ok, the linecard generate the NAT. OK

But I don`t see that Licence is Active. same result that first show.

Thank.

Cisco Employee

Activate license for CGN NAT

At present, CGN s/w does not grab the license.

As long as you've installed the license, you're fine.

New Member

Re: Activate license for CGN NAT

Hi Somnath, I understand you request, if I have Licence for 5MM of traslation why I don`t Active Licence. how I safe me this operation is ok and not have  a problem in production.

Thank.

Cisco Employee

Re: Activate license for CGN NAT

Hi Ruben,

You should not have any issue in production related to CGN/CGv6 license (CLI may not show the status correctly because of the reason I indicated earlier).

regards,

Somnath.

New Member

Activate license for CGN NAT

Hi Somnath, I have in production my CGN but yet I don't see that license be  active with traffic, you have some idea because  this.

RP/0/RP0/CPU0:#sh cgn nat44 NAT44 statistics

Wed Feb 26 11:53:09.010 SCL

Statistics summary of NAT44 instance: 'NAT44'

Number of active translations: 16845

Translations create rate: 67

Translations delete rate: 63

Inside to outside forward rate: 1982

Outside to inside forward rate: 2270

Inside to outside drops port limit exceeded: 0

Inside to outside drops system limit reached: 0

Inside to outside drops resorce depletion: 0

No translation entry drops: 830608

Pool address totally free: 0

Pool address used: 256

RP/0/RP0/CPU0:#sh license

Wed Feb 26 12:48:57.034 SCL

FeatureID: CRS-MSC-40G-IMP (Slot based, Implicit[Remaining time: unlimited]) 

  Total licenses 3

  Available for use         0

  Allocated to location     1

  Active                    2

  Store name             Permanent

  Store index               0

    Pool: Owner

      Total licenses in pool: 3

      Status: Available     0    Operational:    3

      Locations with licenses: (Active/Allocated) [SDR]

              0/5/CPU0        (1/0) [Owner]

              0/4/CPU0        (0/1) [Owner]

              0/3/CPU0        (1/0) [Owner]

FeatureID: XC-XLAT44-5M (Slot based, Permanent) 

  Total licenses 1

  Available for use         1

  Allocated to location     0

  Active                    0

  Store name             Permanent

  Store index               1

    Pool: Owner

      Total licenses in pool: 1

      Status: Available     1    Operational:    0

Regards

Ruben.

Cisco Employee

Activate license for CGN NAT

Hi Ruben,

CGN licenses will not be shown as active for now. So, you can ignore the license state for now as long as you've installed the required licenses. It should not cause any issue on traffic.

regards,

Somnath.

802
Views
0
Helpful
7
Replies