Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

[add licenses to ASR9001 cluster]

Dear CSC:

I have a cluster out of 2 ASR9001 and have the following questions regarding license installation. I'll try to make my questions of the yes or no type answer.

- i know the nv-cluster license is required, per the installation guide it's recommended that the license is generated by using the S/N of rack0. is this enough?

- should i install a second nv-cluster license generated by using the S/N of rack1?

- i purchased 2 iVRF licenses, one for each, rack 0 and rack 1 in this cluster. should i install just one with rack0 S/N?

- should i generate  second ivrf license by using rack1 S/N and install that one also?

- i already installed the rack0 S/N ivrf license and already configured a working vrf (the vrf is operational), but when i show the licenses it doesn't show as active/operational, is this correct?

RP/0/RSP0/CPU0:XXXXXXX(admin)#show license

Wed Jan 15 18:47:35.532 CST

FeatureID: A9K-NV-CLUSTR-LIC (Slot based, Permanent) 

  Total licenses 1

  Available for use         1

  Allocated to location     0

  Active                    0

  Store name             Permanent

  Store index               1

    Pool: Owner

      Total licenses in pool: 1

      Status: Available     1    Operational:    0

FeatureID: A9K-iVRF-LIC (Slot based, Permanent) 

  Total licenses 1

  Available for use         1

  Allocated to location     0

  Active                    0

  Store name             Permanent

  Store index               2

    Pool: Owner

      Total licenses in pool: 1

      Status: Available     1    Operational:    0

RP/0/RSP0/CPU0:XXXXXXXXX(admin)#

RP/0/RSP0/CPU0:XXXXXXXXX(admin)#show run

Wed Jan 15 18:48:09.293 CST

Building configuration...

!! IOS XR Admin Configuration 4.3.2

[snip]

!

nv

edge

  control

   serial XXXXXXX rack 0

   serial YYYYYYY rack 1

  !

!

!

license A9K-iVRF-LIC

location all

!

license A9K-NV-CLUSTR-LIC

location 0/RSP0/CPU0

!

end

RP/0/RSP0/CPU0:XXXXXXXXX(admin)#

Thanks,

c.

338
Views
0
Helpful
0
Replies
CreatePlease to create content