Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

ASR 9000 4.2.1 l2tp vpdn config migration

Hi,

I had a Cisco 7206VXR G2. I used to use vpn l2tp on the router. 7206 config are below:

!

vpdn-group pppoe_customer

description ***** redback *****

accept-dialin

  protocol l2tp

  virtual-template 10

terminate-from hostname 192.168.96.149

source-ip 192.168.96.4

local name 192.168.96.4

lcp renegotiation always

l2tp tunnel password 0 ericsson

l2tp tunnel timeout setup 3600

ip mtu adjust

!

How to migrate or apply on ASR 9000 this config?

Everyone's tags (7)
2 REPLIES
Gold

ASR 9000 4.2.1 l2tp vpdn config migration

Hi,

since there are different approaches and options to consider due to the nature of the ASR9K and IOS XR, I suggest you read this documentation and decide how to do the config based on your knowledge of the network you have.

http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.2/bng/configuration/guide/b_bng_cg42asr9k.pdf

plz Rate if it helped,

Soroush.

Hope it Helps!

Soroush.
New Member

ASR 9000 4.2.1 l2tp vpdn config migration

Thank you kind of help.

I have just read this document (so I read before this document). But I didn't see the LAC or LNS role example config or road map for ASR or XR.

I want to need LAC or LNS role example config or configrations guide.

1796
Views
0
Helpful
2
Replies
CreatePlease to create content