Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ASR9000 l2transport egress load balancing

Hi,

I want to know how are the EFPs load balanced in the egress direction inside the etherchannel. The port-channel contains the service instances.

For Example: If there are 4 member links inside the port-channel and 3 service-instances. For the egress traffic I see 3 EFPs are tagged to three individual member links(meaning the first EFP tags to the first member link, the second EFP tags to the second member link and the third EFP tags to the third member link) and the fourth one is not used. Is it possible for a single EFP to be tagged to multiple member links(egress direction). Coz I know other way round is possible where multiple service instances(EFP) can be tagged to a single member link.

Best Regards

Saikat

1 REPLY
Cisco Employee

Re: ASR9000 l2transport egress load balancing

Google asr9000 load balancing architecture and there should be a good description.
You an put the. Bundle in clan lb also if you want
Xander

Sent from Cisco Technical Support iPad App

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
277
Views
0
Helpful
1
Replies
CreatePlease to create content