Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASR9001 upgrade to 5.1.0

Hi Guys,

I have upgraded a2 X ASR 9001 routers from 4.3.1 to 5.1.0, everything seems to be ok but they are not in production so haven 't had a propoer test.

My concern is that I am getting the below erro whenever I boot them:

RP/0/RSP0/CPU0:Sep 24 14:49:15.733 : ssm_process[419]: %OS-SSM-6-NODAL_SERVICE_STATE_CHANGE : Nodal service state changes from AVAILABLE to UNAVAILABLE

&

LC/0/0/CPU0:Sep 24 14:52:30.564 : ssm_process[351]: %OS-SSM-6-NODAL_SERVICE_STATE_CHANGE : Nodal service state changes from AVAILABLE to UNAVAILABLE

Can anyone hlep me with this? what is the 'Nodal' service, should I be concerned?

Thanks a lot in advance.

Everyone's tags (3)
4 REPLIES
Cisco Employee

ASR9001 upgrade to 5.1.0

Did you follow the procedures described at

http://www.cisco.com/web/Cisco_IOS_XR_Software/pdf/ASR9000_Upgrade_Procedure_510.pdf ?

Cheers, Gustavo

New Member

ASR9001 upgrade to 5.1.0

I did, I read it a couple of times

Cisco Employee

ASR9001 upgrade to 5.1.0

Hi,

For this issue, IMHO, it's better to open a TAC case to investigate the issue.

Cheers, Gustavo

Cisco Employee

ASR9001 upgrade to 5.1.0

Hi.

Do you see any side effects because of this message ? If show ssm detail does not alarm you any specifics, then its just harmless message. Make sure your services are AVAIL with show ssm detail command.

Thanks

Venkat Nagarajan

639
Views
0
Helpful
4
Replies
CreatePlease login to create content