Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ASR9006 BGP Policy Memory Error

Hi 

 

Im working on asr9006 running RSP440 and XR 4.3.4, and after configuring and committing bgp neighbour and route-policy comnfig, the box complained with the errors below right after I committed the changes.

The changes were accepted and the box is idle, ie no traffic, and no prefixes as the bgp sessions are shut so the box is not busy

However it complains of a failed policy-in and being in an inconsistent state together with a memory allocation failure

 

The below is what I got on the console as soon as i committed the changes to my bgp process to define my bgp neighbour ip addresses and route policies

 

The last item in the log, the failed to allocate memory continues every minute, i believe its trying to regain some memory by resetting but not managing and going into a loop.

 

Have a case open with TAC but not joy so far.

 

anyone seen something like this before

 

thanks

 

Mark

 

RP/0/RSP0/CPU0:Apr  8 03:11:10.775 CET: config[65850]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'admin'. Use 'show configuration commit changes 1000000228' to view the changes.
RP/0/RSP0/CPU0:south05-ASR9006-TEL(config-bgp-nbr-af)#RP/0/RSP0/CPU0:Apr  8 03:11:10.868 CET: bpm[1060]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : bpm-default:(A)inst-id 0, Connection Open
RP/0/RSP1/CPU0:Apr  8 03:11:10.938 CET: bgp[1045]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : default, process instance 1:(S)inst-id 0, Connection Establised
RP/0/RSP0/CPU0:Apr  8 03:11:11.071 CET: bgp[1045]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : default, process instance 1:(A)inst-id 0, Connection Establised

 

RP/0/RSP1/CPU0:Apr  8 03:11:12.467 CET: bgp[1045]: %ROUTING-BGP-3-CONFIG_SET : Notify for default/0/12709/ord_a/default/nbr/0x0/edm/ord_u/0x3/3e732d31/________/ord_s/0x0/ord_g/policy-in failed with error: 'ora_shared' detected the 'warning' condition 'PCL engine failed to pass in built parameters', system may now be in an inconsistent state.

 

RP/0/RSP1/CPU0:Apr  8 03:11:12.502 CET: bgp[1045]: %ROUTING-BGP-3-CONFIG_SET : Notify for default/0/12709/ord_a/default/nbr/0x0/edm/ord_u/0x3/2001200030800a9b0000000000000001/________/ord_s/0x5/ord_g/policy-in failed with error: 'ora_shared' detected the 'warning' condition 'PCL engine failed to pass in built parameters', system may now be in an inconsistent state.

 

 

RP/0/RSP0/CPU0:Apr  8 03:11:12.510 CET: bgp[1045]: %ROUTING-BGP-3-CONFIG_SET : Notify for default/0/12709/ord_a/default/nbr/0x0/edm/ord_u/0x3/3e732d31/________/ord_s/0x0/ord_g/policy-in failed with error: 'ora_shared' detected the 'warning' condition 'PCL engine failed to pass in built parameters', system may now be in an inconsistent state.

RP/0/RSP0/CPU0:Apr  8 03:11:12.553 CET: bgp[1045]: %ROUTING-BGP-3-CONFIG_SET : Notify for default/0/12709/ord_a/default/nbr/0x0/edm/ord_u/0x3/2001200030800a9b0000000000000001/________/ord_s/0x5/ord_g/policy-in failed with error: 'ora_shared' detected the 'warning' condition 'PCL engine failed to pass in built parameters', system may now be in an inconsistent state.

RP/0/RSP1/CPU0:Apr  8 03:11:12.740 CET: bgp[1045]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : default:(S)inst-id 0, Initial Config Done

RP/0/RSP0/CPU0:Apr  8 03:11:12.871 CET: bgp[1045]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : default:(A)inst-id 0, Initial Config Done

 

RP/0/RSP0/CPU0:Apr  8 03:11:14.900 CET: bgp[1045]: %ROUTING-BGP-3-NOMEM_RESET : [16] : Failed to allocate memory for update grp, resetting neighbor  : pkg/bin/bgp : (PID=2937152) :  -Traceback= 4225c65 421b4b7 822605f 82242b2 cda2c48 421d5b0 828e020

RP/0/RSP0/CPU0:Apr  8 03:11:20.430 CET: rmf_svr[377]: %HA-REDCON-1-STANDBY_READY : standby card is ready

 


RP/0/RSP0/CPU0:south05-ASR9006-TEL(config-bgp-nbr-af)#RP/0/RSP0/CPU0:Apr  8 03:12:15.463 CET: bgp[1045]: %ROUTING-BGP-3-NOMEM_RESET : [16] : Failed to allocate memory for update grp, resetting neighbor  : pkg/bin/bgp : (PID=2937152) :  -Traceback= 4225c65 421b4b7 822605f 82242b2 cda2c48 421d5b0 828e020

2 REPLIES
Cisco Employee

Hi Mark,I took a quick glance

Hi Mark,

I took a quick glance at the TAC case and it looks like the engineer got back to you today with further information on the issue. For all XR issues make sure you open the case under the XR OS technolgoy in order to get an XR/SP TAC engineer.

 

Thanks,

Sam

I've this problem too and it

I've this problem too and it has been solved adding a prefix over a empty prefix-set that we've created for block some prefix faster, look the config below as an example.

The problem...
#show rpl route-policy pfx_Peering-A detail
prefix-set DENY_EBGP_OUT
end-set
!
route-policy ADV_TO_Peering-A
if destination in DENY_EBGP_OUT then
drop
elseif (MY-POLICIES......)


The Solution...
#show rpl route-policy pfx_Peering-A detail
prefix-set DENY_EBGP_OUT
1.1.1.1/32 --> I just add any prefix here, because the BUG CSCul39702 is hitting.
end-set
!
route-policy ADV_TO_Peering-A
if destination in DENY_EBGP_OUT then
drop
elseif (MY-POLICIES......)

Regards

423
Views
0
Helpful
2
Replies