I’m about to start the validation of the 4.2.3 to 4.3.4 upgrade process, but I need advice regarding the disk space needed. The PIEs that I need to install are about 430Mb, and the size I have free in the 9Ks is around 500Mb (after repartition).
Is this enough to add and activate 4.3.4 PIEs? Or should I remove the 4.2.3 SMUs first? What is the minimum space needed to install 4.3.4?
Please use the install remove command from admin mode to remove these files from disk and let me know the new available disk space. I saw a few other SMUs which could be removed but they are currently active and only added up to around 20 or 30MBs.
Question: Have the phone connected and can ring out-but no sound coming from the handset - analog home phone - phone makes connection and pick up at the other end is ok. Can you help?
Question: Have the phone connected and can ring out-but no sound coming from the handset - analog home phone - phone makes connection and pick up at the other end is ok. Can you help?Answer
iPXE boot in ASR9K
This document applies to NCS5500 and ASR9000 routers and has been verified as such.
traditional ECMP or equal cost multipath loadbalances traffic over a number of available paths towards a destination. When one path fails, the traffic gets r...