BGP attribute ID limited to 64K in 3.8.3, routes without attribute ID
fixed in 3.9.2, 4.0.0 and 4.1.0 releases.
If you are running 3.8.3 you may consider to have a SMU activated for this issue.
If you are running 4.0.0 and still getting this message please be aware
that in 4.0.0 BGP increased the max supported
attributes from 2^16 to 2^20 , and the FIB can only handle 2^16
attributes in hardware, thus with your full internet routing table you
were exceeding the attribute index database maximum of 65536. In 4.0.1,
the FIB index space is increased to 2^18 to increase the attribute space
I can recommend to open a TAC SR to verify what exactly happen in your case.
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...