Bundle-Ether between MSC card and FP140 card on CRS-3

[Jaime Soto Valenzuela]

Hi,

Currently we have implemented a Bundle-Ether between 3 interfaces in MSC Card (8x10GE) and now we are planning replace one MCS Card by one FP-140 Card (14x10GE), so I would like to know if there is any risk or any incompatibility to form Bundle-Ether with 2 interfaces of MSC card and one interface of FP-140 Card.

Regards,

Jaime Soto.

[Vadim Zhovtanyuk]

Hi Jaime,

as far as i know there is no issue with splitting the bundle between MCS and FP-140 cards.

wbr

/vadim