Can someone please point me out a licensing guide, something that clear explain what each license activates in terms of features, I have looked at the Feature navigator and there is no option for IOS-XR, I'm trying to build a config for two 9001 and I'm lost on the licensing
Ex in FN for IOS: for BGPv4 you need Adv-IPServices
----- From the first link "Core routing features are available for use without any license." -- IGP, BGP, IPv4 and IPv6, multicast routing ... are there as a standard feature
----- I assume that features such has QOS, EEM, IP SLA .... are there also by default without the need of an extra license
----- So if I need up to 8 VRF's per slot I will need "A9K-iVRF-LIC" or "A9K-9001-AIP-LIC" for full scale VRF
Yes, but I would like to tell you that ASR9001 has an embedded -SE Enhanced LC, 4 on-board 10GE ports and two MPA slots. So, A9K-IVRF-LIC is applicable to the whole chassis (8 VRFs per system, and not per MPA slot).
I know that 9001 is the "small" 2RU and I had the doubt regarding the fixed 4x10Gbps interfaces in terms of licensing, so it's safe to consider both MPA's (2) and the fixed 4x1Gbps has one slot only .... and you have just aswered that THANKS
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...