Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cisco CRS-1/8 to CRS-3/8 upgrade

Hi Folks,

has any body done CRS-1/8 to CRS-3/8 upgrade smoothly ? from the CCO I could find only that it needs IOS-XR 4.0 and Fabric Upgrade.

just want to make  sure these are the only two actions to perform to make CRS-1 to CRS-3,

my upgrading procedure will be as follows

1. Upgrade the code to IOS-XR 4.0 with CRS-1 fabric.

2. once the router is loaded with 4.0, replace Fabric cards one by one.

Need your comments.

Rgds

Harin

1 REPLY
Hall of Fame Super Silver

Re: Cisco CRS-1/8 to CRS-3/8 upgrade

Hello Harin,

your procedure looks like reasonable, various rommon firmware upgrades should be part of first step as necessary.

Hope to help

Giuseppe

991
Views
0
Helpful
1
Replies
CreatePlease to create content