Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CRS - 1X100GBE - ACLs

Hello all,

I would like to understand if an ACL matching protocols is hardware processed in a 1X100GBE LC (with FP140).

 

Ex.:

permit tcp 192.168.0.0/24 10.16.0.0/24 eq ssh

 

Thanks,

Pedro

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi Pedro,yes ACL's with L3/L4

Hi Pedro,

yes ACL's with L3/L4 matching is processed in hardware, so you're all good :)

ps. if you want to control telnet/SSH/snmp to the local system, you can also use MPP (management plane protection).

regards

xander

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
2 REPLIES
Cisco Employee

Hi Pedro,yes ACL's with L3/L4

Hi Pedro,

yes ACL's with L3/L4 matching is processed in hardware, so you're all good :)

ps. if you want to control telnet/SSH/snmp to the local system, you can also use MPP (management plane protection).

regards

xander

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
New Member

Thx Xander!!!

Thx Xander!!!

66
Views
5
Helpful
2
Replies
CreatePlease login to create content