Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Double tagged traffic on L3 Interface

Hello All,

Traffic tagged with outer vlan 3050 and inner vlan 350 isn't matching the following L3 interface configuration:

interface GigabitEthernet0/4/0/28.3050

vrf ABC

ipv4 address 20.0.0.11 255.255.255.0

encapsulation dot1q 3050

Even with no second tag configured should´t the outer vlan match vlan 3050 configured on the interface ?

Many thanks for your help!

David

  • XR OS and Platforms
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Double tagged traffic on L3 Interface

Hello David,

Unambiguous vlan definition works for L2 interfaces.

For L3 you should define 2nd tag too.

!

interface GigabitEthernet0/4/0/28.3050

vrf ABC

ipv4 address 20.0.0.11 255.255.255.0

encapsulation dot1q 3050 second-dot1q 350

!

Regards,

/A

2 REPLIES
Cisco Employee

Re: Double tagged traffic on L3 Interface

Hello David,

Unambiguous vlan definition works for L2 interfaces.

For L3 you should define 2nd tag too.

!

interface GigabitEthernet0/4/0/28.3050

vrf ABC

ipv4 address 20.0.0.11 255.255.255.0

encapsulation dot1q 3050 second-dot1q 350

!

Regards,

/A

New Member

Re: Double tagged traffic on L3 Interface

Thanks Akiritch, once again for your prompt response.

491
Views
5
Helpful
2
Replies
This widget could not be displayed.