Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to access USB flash connected to ASR 9K ?

I detected the flash is inserted but i don't know how to access the flash drive. Pls help.

RP/0/RSP0/CPU0:Jul  2 15:22:44.077 : umass-enum[97]: Flash device inserted

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

How to access USB flash connected to ASR 9K ?

Correct, note that you can't boot from rommon from it today, this is something we're trying to fix up.

Also reference the asr9000 turboboot and initial system bring up which has a dedicated section on the file system you may find interesting.

regards

xander

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
2 REPLIES
Community Member

How to access USB flash connected to ASR 9K ?

i found it. it is mapped to disk1:

Cisco Employee

How to access USB flash connected to ASR 9K ?

Correct, note that you can't boot from rommon from it today, this is something we're trying to fix up.

Also reference the asr9000 turboboot and initial system bring up which has a dedicated section on the file system you may find interesting.

regards

xander

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
434
Views
0
Helpful
2
Replies
CreatePlease to create content