Thanks for your help, and I'll put that command and update the result to you. However I need to usd AToM (PPP on POS interface) founction i dont' sure that my system already support that function or not;
This is my hardware now:
RP/0/RP0/CPU0#sh diag ?
0/0/CPU0 Fully qualified location specification
0/1/CPU0 Fully qualified location specification
0/2/CPU0 Fully qualified location specification
0/RP0/CPU0 Fully qualified location specification
0/RP1/CPU0 Fully qualified location specification
WORD Fully qualified location specification
WORD Partially qualified location specification
details display more details than the normal show diag
summary display a summary (one line per slot) of the chassis
| Output Modifiers
RP/0/RP0/CPU0:#sh diag summary
Fri Jul 19 10:06:40.651 THAI
CARD 0/0/* : Cisco CRS-1 Series Forwarding Processor 40G
PLIM 0/PL0/* : Cisco CRS-1 Series 4x10GE Interface Module
CARD 0/1/* : Cisco CRS-1 Series Forwarding Processor 40G
PLIM 0/PL1/* : Cisco CRS-1 Series 20x1GE Flexible Interface Module
SPA 0/1/0 : 10-port 1 GbE Shared Port Adapter V2
SPA 0/1/1 : 8-port OC12/STM4 POS Shared Port Adapters
SPA 0/1/2 : 10-port 1 GbE Shared Port Adapter V2
SPA 0/1/4 : 4-port OC48/STM16 POS/RPR Shared Port Adapter
CARD 0/2/* : Cisco CRS-1 Series Forwarding Processor 40G
PLIM 0/PL2/* : Cisco CRS-1 Series 4x10GE Interface Module
CARD 0/RP0/* : Cisco CRS-1 Series 8 Slots Route Processor
CARD 0/RP1/* : Cisco CRS-1 Series 8 Slots Route Processor
I am not real sure on the question here. Usually "what engine" type of question is for the 12k. It has multiple engine cards that have been developed over it's lifetime. XR supports engine 3 and 5. But your output is from a CRS. CRS doesn't have different engines. It does have CRS-1 or CRS-3 cards. But all of yours are CRS-1.
Now it's looking like you are wanting to do ATOM over PPP? I did a quick look at the configuration guides. Not sure if CRS supports this right now.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...