Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to know SFP Type (Electrical or Optical) in IOS XR?

When I check 'show inventory' output in ASR9k, I can't see any PID displayed for SFP. I am aware that it is an electrical SFP but I want to know this from any output from the CLI.

Command Output is attached for the reference.

If I have no physical presence at the router site then how do I to get to know that installed SFP is electrical SFP or optical SFP

Everyone's tags (7)
1 REPLY
New Member

How to know SFP Type (Electrical or Optical) in IOS XR?

Use the command  sh controllers gigabitEthernet 0/x/y/z phy

For example:

RP/0/RSP1/CPU0:ASR9K#sh controllers gigabitEthernet 0/2/0/10 phy

SFP EEPROM  port: 10

        Xcvr Type: SFP

        Xcvr Code: 1000BASE-T

        Encoding: 8B10B

        Bit Rate: 1300 Mbps

        Link Reach Copper: 100 meter

2719
Views
0
Helpful
1
Replies