Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS XRv Crashes on booting.

Hi Guys I have tried all versions of IOS-XRv for Virtual Box and VMware, but in both cases the IOX-XRv crashes as soon as it boots.

with the following error:

Section:idt offset:0x0000006c
Section:pgdir offset:0x00000070
  Page Directory 0000d000

System page at phys:00012000 user:fed12000 kern:fed14000
Starting next program at vfe42599c
Missing reboot reason information. Reboot reason will be derived from Kernel signal code !!!
Writing crashinfo
Exception at 0xfea8f35a signal 5 c=2 f=0

Active process(s):

                 CR0 #         0x8004003b
                 CR2 #                  0
                 CR3 #             0xd000
                 CR4 #              0x2d0
                 DR0 #                  0
                 DR1 #                  0
                 DR2 #                  0
                 DR3 #                  0
                 DR6 #         0xffff0ff0
                 DR7 #              0x400

          GDTR limit #              0x13f
   GDTR base address #         0xfed15474
                LDTR #               0xa0
          IDTR limit #              0x70f
   IDTR base address #         0xfed135b4
                  TR #              0x100
Dumping kernel printf messages

Writing crashinfo done!

Writing x86 kernel core file


Everyone's tags (1)
CreatePlease login to create content