Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

[IOX 3.4 to 3.6 software upgrade procedure document]

hi, all:

does anybody have a document describing the procedure to be followed when upgrading from IOX 3.4 to 3.6? all i can find on the web is going from IOS to IOX which i don't want.

please help!

c.

2 REPLIES
Bronze

Re: [IOX 3.4 to 3.6 software upgrade procedure document]

Here is the URL for the up gradation requirement for the IOX which will help you :

http://www.cisco.com/en/US/ts/fn/620/fn62788.html

Re: [IOX 3.4 to 3.6 software upgrade procedure document]

Please see this document for more details.

http://www.cisco.com/web/Cisco_IOS_XR_Software/pdf/XR12000_Upgrade_Procedure_3_4_x_3_5_x__3_6_x_to_3_6_1.pdf

Even though everything is documented in here, please perform the procedure on your LAB routers which have identical SMU's and PIE's as your live routers, including the hardware ( i say hardware as well because if you have a firewall module in live it will have an additional pie for it, and if you have to have identical pie's in LAB then you need to have identical hw as well).

Once you perform this upgrade you can document all the steps in a MOP and forward for live upgrades.

HTH-Cheers,

Swaroop

390
Views
0
Helpful
2
Replies