Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IP Interface Within VPLS

  I was wondering if there was  way to create a layer 3 interface with an IP inside a VPLS on an ASR.  On an IOS platform, it would be like creating an SVI associated with the bridge domain.  It looks like Pseudowire Headend is close to what I'm looking to do, but that seems only realted to a single PW, not a VPLS.  I'd just like to have a layer 3 interface living inside the VPLS without having to have the traffic exit the ASR and come back in.  Thanks for any help.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

You can use a BVI for that.

You can use a BVI for that. Functionally the same as an SVI.

Probably want a config example for that and I have that here for you: https://supportforums.cisco.com/document/59741/asr9000xr-flexible-vlan-matching-evc-vlan-tag-rewriting-irbbvi-and-defining-l2

 

regards

xander

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
2 REPLIES
Cisco Employee

You can use a BVI for that.

You can use a BVI for that. Functionally the same as an SVI.

Probably want a config example for that and I have that here for you: https://supportforums.cisco.com/document/59741/asr9000xr-flexible-vlan-matching-evc-vlan-tag-rewriting-irbbvi-and-defining-l2

 

regards

xander

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
New Member

Thank you, that looks like

Thank you, that looks like what I need.

69
Views
0
Helpful
2
Replies
CreatePlease login to create content