L2VPN Mode and Policing under the L2transport Interface
I am working on an ASR 9k system and are wondering if there is any possibilities to Police the traffic on the AC -- interface gig0/7/0/10 that is now a L2transport interface, I suppose I can mark and send the traffic over the MPLS network ( Qos stuff ) but can I use some Policing ?? to control how much traffic that is allowed through the interface to the BridgeDomain.
I can put a policer under the BVI interface, But is there any possibility under the L2transport interface ?
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...