Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

LDP based CSC VPN - ASR9k/IOS-XR 4.3.4

Hi All,

I am trying to configure CSC MPLS VPN on IOS-XR 4.3.4 on ASR 9K as PE. Currently the configuration is on NPE-G2 and NPE-G1 as PE routers. 

LDP is configured between PE and CE for label exchange and OSPF is the protocol between PE and CE.

When I try to configure LDP between ASR9K and CPE, I am not getting LDP as the option between PE and CE, I am not getting any option of specifying LDP  under the VRF.

Even the IOS-XR MPLS config guide only talks about BGP based label exchange between PE and CE on IOS-XR.

I would like to confirm, can LDP be configured under VRF in ASR9K as PE or BGP is the only option available?

thanks in advance
Arun

  • XR OS and Platforms
1 REPLY
New Member

Got the answer from Cisco NSP

Got the answer from Cisco NSP mailing list.

 

CSC VPN on MPLS LDP is available only from IOS-XR 5.1.1

 

http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r5.1/general/release/notes/reln_511a9k.html#concept_8CC149B95D7F47D2A19CA1CF5153FB4F

 

 

237
Views
0
Helpful
1
Replies