License & HDD required for Upgrading IOS to IOS-XR in C12000
We are in the process of upgrading to IOS-XR in C12000. I have gone through the documents that the basic hardware and software prerequisites should be met for upgrading to IOS-XR.
1. The hardware is meeting all the prerequisites and I am planning to test IOS-XR but would like to know if any license to be purchased for Upgrading to XR. Because when I checked in Dynamic confiugration tool, I found "Cisco XR 12000 RP Memory Upgrade Kit" "XR-C12K-LCONV".
2. Also how about the HDD that XR requires as the current hardware configuration do not have and even the Cisco document does not specify about HDD.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...