cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1510
Views
5
Helpful
2
Replies

mac-move, ASR9000

Ante Sucic
Level 1
Level 1

Hello All,

Is mac-move feature supported on ASR9000?

For example is it possible to enable mac-move notifications per bridge-domain?

Regards,

Ante

1 Accepted Solution

Accepted Solutions

Bryan Garland
Cisco Employee
Cisco Employee

Ante,

Yes, you can do it by using the mac secure feature.  For example:

l2vpn

bridge group bgarland

  bridge-domain bgarland

   mac

    secure

     action none

     logging

    !

   !

   mtu 9200

   neighbor 192.168.1.12 pw-id 1113

This will not take an action, but will give you a syslog showing the mac move from one port to another.

thanks,

Bryan

View solution in original post

2 Replies 2

Bryan Garland
Cisco Employee
Cisco Employee

Ante,

Yes, you can do it by using the mac secure feature.  For example:

l2vpn

bridge group bgarland

  bridge-domain bgarland

   mac

    secure

     action none

     logging

    !

   !

   mtu 9200

   neighbor 192.168.1.12 pw-id 1113

This will not take an action, but will give you a syslog showing the mac move from one port to another.

thanks,

Bryan

Thank you for your help Bryan.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: