Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

mac-move, ASR9000

Hello All,

Is mac-move feature supported on ASR9000?

For example is it possible to enable mac-move notifications per bridge-domain?

Regards,

Ante

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

mac-move, ASR9000

Ante,

Yes, you can do it by using the mac secure feature.  For example:

l2vpn

bridge group bgarland

  bridge-domain bgarland

   mac

    secure

     action none

     logging

    !

   !

   mtu 9200

   neighbor 192.168.1.12 pw-id 1113

This will not take an action, but will give you a syslog showing the mac move from one port to another.

thanks,

Bryan

2 REPLIES
Cisco Employee

mac-move, ASR9000

Ante,

Yes, you can do it by using the mac secure feature.  For example:

l2vpn

bridge group bgarland

  bridge-domain bgarland

   mac

    secure

     action none

     logging

    !

   !

   mtu 9200

   neighbor 192.168.1.12 pw-id 1113

This will not take an action, but will give you a syslog showing the mac move from one port to another.

thanks,

Bryan

New Member

mac-move, ASR9000

Thank you for your help Bryan.

460
Views
0
Helpful
2
Replies