Hi actually we are operating two ASR9000 on High availability on a network of MPLS, when ask the routing table for a expecific VRF have not trouble whit obtein it but when ask the general routing table the devices send the follow information:
RP/0/RSP0/CPU0:ED_MEX_2#show bgp vrf campus neighbors 172.16.19.9 advertised-routes Fri Sep 27 13:19:16.466 pst % Failed to retrieve data from EDM server: 'BGP' detected the 'resource not available' condition 'Code(0)': Not enough memory RP/0/RSP0/CPU0:ED_MEX_2#
RP/0/RSP1/CPU0:ED_MEX_1#show bgp vrf campus neighbors 172.16.19.5 advertised-routes Fri Sep 27 13:17:25.582 UTC % Failed to retrieve data from EDM server: 'BGP' detected the 'resource not available' condition 'Code(0)': Not enough memory
someone know something about of this nemonic or we need to upgrade the memory on the devices.
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on...
Internet security is important with the increasing attacks that are happening every day. Many internet and browsing security solutions exist, but some are not very easy to use or maybe the question is how can I enable them?