Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Other than the CRS-16-RP-B RP whether to support the CRS-FLASHDISK-16G

Hello.

I know CRS-16-RP-B is support the CRS-FLASH-DISK-16G=

CRS-FLASH-DISK-16G was wondering if it supports the other RP (ex. CRS-16-RP or CRS-PRP-6G, CRS-PRP-12G).

Thank you.

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Hi, Only the RP-B supports

Hi,

 

Release 4.2 supports the Cisco CRS PCMCIA Flash Disk 16 GB on RP (A and B), DRP and SC-Ges. The cards must be formatted as FAT32.

 

The CRS-16-RP reached end of HW support 10/30/2012.

CRS-PRPs have internal SSDs.

 

Depending on the release you are on and want to go will depend on what you choose to do, but typically the recommendation is to upgrade to the PRP.

 

 

Edit: One source was not correct on which cards support this flash disk, I am correcting this.

 

Thanks,

Sam

Cisco Employee

I apologize for the error

I apologize for the error previously. I edited my previous comment and I should clarify.

 

It will work, but again the RP-A is now end-of-support, so it is advised to upgrade for this reason as well as the ability to upgrade SW version in the future.

 

Sam

5 REPLIES
Cisco Employee

Hi, Only the RP-B supports

Hi,

 

Release 4.2 supports the Cisco CRS PCMCIA Flash Disk 16 GB on RP (A and B), DRP and SC-Ges. The cards must be formatted as FAT32.

 

The CRS-16-RP reached end of HW support 10/30/2012.

CRS-PRPs have internal SSDs.

 

Depending on the release you are on and want to go will depend on what you choose to do, but typically the recommendation is to upgrade to the PRP.

 

 

Edit: One source was not correct on which cards support this flash disk, I am correcting this.

 

Thanks,

Sam

New Member

Thanks for your help.Have a

Thanks for your help.

Have a good day :)
 

New Member

I'll ask one more thing. CRS

I'll ask one more thing.

 

CRS-16-RP is now using.

If 16G disk to be inserted into the CRS-16-RP, Is it possible to the 16G disk working?

 

Thanks for your help. :)

Cisco Employee

I apologize for the error

I apologize for the error previously. I edited my previous comment and I should clarify.

 

It will work, but again the RP-A is now end-of-support, so it is advised to upgrade for this reason as well as the ability to upgrade SW version in the future.

 

Sam

New Member

Thanks. :)

Thanks. :)

155
Views
0
Helpful
5
Replies
CreatePlease login to create content