In 5.1.0 the support for P2MP LSP for VPLS multicast was introduced. AFAIK for Multicast VPN there is already support for mLDP since 4.2.0. But for VPLS Multicast there is only RSVP supported as transport protocol:
RP/0/RSP0/CPU0:a9klab1(config-l2vpn-bg-bd-vfi)#multicast p2mp transport ?
rsvp-te Use RSVP-TE as transport
Why is that? Why is it not possible to use mLDP for Multicast VPLS transport?
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...