reading through the config guides, I see that there is documentation that shows redistribution of statics, connected, and various routing protocols (am look at specifically ospf, and BGP).
Is redistributing subscriber into a routing protocol a supported option ? (it appears to allow me to do it). I understand that I cannot leak subscriber connected routes between VRFs, however would like to know if i can at least redistribute them, and that the redistribution is a "supported" function.
If not, any advice on how to dynamically allow routing to connected (ooops subscriber) interface would be appreciated, as advertising a summary to null, then relying on subscriber routes does not help when i have pools of various sizes that can move around.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...