Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Rommon HangUp C7200 VXR, Please help !!

I have C7200 Series VXR, manufacture 1997


I was press CPU RESET bottom

------------- PROBLEM --------------------


*** PUSH BUTTON NMI ***

  PC = 0xbfc0b960, SP = 0x80005db8, RA = 0xbfc0b990

CPU Registers:

ZERO = 0x00000000, AT = 0xfffffffe, V0 = 0xffffffff, V1 = 0xffffffff

  A0 = 0xa000203a, A1 = 0x00000080, A2 = 0x80005e0c, A3 = 0xa0002db0

  T0 = 0x80005d68, T1 = 0x00000002, T2 = 0xfffffffc, T3 = 0x00000003

  T4 = 0x20000000, T5 = 0xbfc326b4, T6 = 0x00000000, T7 = 0x3041d000

  S0 = 0x00000000, S1 = 0xa0000000, S2 = 0xa000203a, S3 = 0x0000007f

  S4 = 0xa000203a, S5 = 0x00000016, S6 = 0x00000008, S7 = 0x00000003

  T8 = 0x3041d001, T9 = 0xffffffff, K0 = <N/A>,      K1 = <N/A>

  GP = 0xffffffff, SP = 0x80005db8, S8 = 0x0000000a, RA = 0xbfc0b990

SREG = 0x3050d005, BADVADDR = 0xae015844, CAUSE = 0x00000000

EPC = 0xbfc0b990, ERR_EPC = 0xbfc0b960

System Return Info:

count: 19,  reason: reset

pc:0x6082ae2c,  error address: 0x0

Stack Trace:

FP: 0x00000000, PC: 0x00000000

FP: 0x00000000, PC: 0x00000000

FP: 0x00000000, PC: 0x00000000

FP: 0x00000000, PC: 0x00000000

FP: 0x00000000, PC: 0x00000000

FP: 0x00000000, PC: 0x00000000

FP: 0x00000000, PC: 0x00000000

FP: 0x00000000, PC: 0x00000000

C7200 platform with 524288 Kbytes of main memory


Please reset before booting


System Bootstrap, Version 12.2(4r)B4, RELEASE SOFTWARE (fc1)

Technical Support:

http://www.cisco.com/techsupport


Copyright (c) 2006 by cisco Systems, Inc.

C7200 platform with 524288 Kbytes of main memory


rommon 1 >


After this prompt cannot type anything.

Any suggestion what should I do?

Everyone's tags (5)
1 REPLY
Cisco Employee

Rommon HangUp C7200 VXR, Please help !!

hard to say. I am afraid you have to open a tac case as we'll have to decide the stack traces to see what is going on.

When you open the case, make sure you include all the images relevant to this situation as that is needed to decode the traces.

you pressed the reset button and it reset, did you expect flowers?

xander

Xander Thuijs CCIE #6775 Principal Engineer ASR9000, CRS, NCS6000 & IOS-XR
596
Views
0
Helpful
1
Replies
CreatePlease to create content