Hi guys,
I have the following configuration.
Notice that I have the interface and peer bgp into shutdown.
interface TenGigE0/6/0/0
ipv4 address 10.10.10.2 255.255.255.252
shutdown
load-interval 30
!
RP/0/RP0/CPU0:CRS#sh run router bgp 34 neighbor 10.10.10.1
Wed Mar 14 15:49:29.283 DST
router bgp xxx
neighbor 10.10.10.1
shutdown
description teste
update-source TenGigE0/6/0/0
address-family ipv4 unicast
send-community-ebgp
remove-private-AS
soft-reconfiguration inbound always
!
!
!
But when I try to see the prefix you have to shutdown the interface, I get the following output
RP/0/RP0/CPU0:CRS#sh route 10.10.10.1
Wed Mar 14 15:39:49.300 DST
Routing entry for 10.10.10.0/19
Known via "bgp 34", distance 180, metric 0
Tag 8657, type external
Installed Mar 2 06:38:38.526 for 1w5d
Routing Descriptor Blocks
XX.XX.XX.XX, from XX.XX.XX,XX, BGP multi path
Route metric is 0
YY.YY.YY.YY, from YY.YY.YY.YY, BGP multi path
Route metric is 0
10.10.10.1, from 10.10.10.1 (quarantined), BGP multi path
Route metric is 0
No advertising protos.
this means what? is supposed to continue to see the prefix in the routing table?
what it means to be in the state this prefix 'quarentined'?
