Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Routing Table

Hi guys,

I have the following configuration.

Notice that I have the interface and peer bgp into shutdown.


interface TenGigE0/6/0/0

ipv4 address 10.10.10.2 255.255.255.252

shutdown

load-interval 30

!

RP/0/RP0/CPU0:CRS#sh run router bgp 34 neighbor 10.10.10.1

Wed Mar 14 15:49:29.283 DST

router bgp xxx

neighbor 10.10.10.1

  shutdown

  description teste

  update-source TenGigE0/6/0/0

  address-family ipv4 unicast

   send-community-ebgp

   remove-private-AS

   soft-reconfiguration inbound always

  !

!

!

But when I try to see the prefix you have to shutdown the interface, I get the following output

RP/0/RP0/CPU0:CRS#sh route 10.10.10.1                      

Wed Mar 14 15:39:49.300 DST

Routing entry for 10.10.10.0/19

  Known via "bgp 34", distance 180, metric 0

  Tag 8657, type external

  Installed Mar  2 06:38:38.526 for 1w5d

  Routing Descriptor Blocks

    XX.XX.XX.XX, from XX.XX.XX,XX, BGP multi path

      Route metric is 0

    YY.YY.YY.YY, from YY.YY.YY.YY, BGP multi path

      Route metric is 0

    10.10.10.1, from 10.10.10.1 (quarantined), BGP multi path

      Route metric is 0

  No advertising protos.

this means what? is supposed to continue to see the prefix in the routing table?

what it means to be in the state this prefix 'quarentined'?

1 REPLY
New Member

Routing Table

I'm alredy knows what's means ...

Thanks you for everything.

501
Views
0
Helpful
1
Replies