Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

SNMP configuration backup

I am doing daily backup on our IOS platforms with command:

snmpset -r 3 -t 30 -v2c -c COMM HOST .1.3.6.1.4.1.9.2.1.55.XXX.XXX.XXX.XXX s HOST-confg

There is no mib for this in IOS XR.

Is there any other solution for automatic config backup ?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SNMP configuration backup

Hello Dragoljub,

XR supports  CISCO-CONFIG-COPY-MIB instead to copy config files.

Here is an example. (777 is a random session number)

Create an Entry and Wait

               snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.14.777 i 5

Set Copy protocol to tftp

                snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.2.777 i 1

Set copy to tftp server

              snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.3.777 i 4

Set copy from config     

                snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.4.777 i 1

Set tftp server address

               snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.5.777 a 1.1.1.1

Set destination file name

                snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.6.777 s runningTest.txt

Activate the entry          

                snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.14.777 i 1

Verify the copy was successful

                snmpwalk -v2c -c COMMUNITY HOST ccCopyState

Once successful, destroy the entry

               snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.14.777 i 6

Regards,

/A

3 REPLIES
Cisco Employee

SNMP configuration backup

Hi Dragoljub,

you may use EEM script to run daily operations.

http://www.cisco.com/en/US/docs/routers/crs/software/crs_r4.1/system_monitoring/configuration/guide/sysmon_cg41crs_chapter2.html

Other solutoin may be script running on PC wich will be connecting to XR-based devices and run the commands

BWR

V.

Cisco Employee

Re: SNMP configuration backup

Hello Dragoljub,

XR supports  CISCO-CONFIG-COPY-MIB instead to copy config files.

Here is an example. (777 is a random session number)

Create an Entry and Wait

               snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.14.777 i 5

Set Copy protocol to tftp

                snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.2.777 i 1

Set copy to tftp server

              snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.3.777 i 4

Set copy from config     

                snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.4.777 i 1

Set tftp server address

               snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.5.777 a 1.1.1.1

Set destination file name

                snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.6.777 s runningTest.txt

Activate the entry          

                snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.14.777 i 1

Verify the copy was successful

                snmpwalk -v2c -c COMMUNITY HOST ccCopyState

Once successful, destroy the entry

               snmpset -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.14.777 i 6

Regards,

/A

Re: SNMP configuration backup

I just want to add that i have problems with "Verify step".

So just use OID ...

snmpwalk -v2c -c COMMUNITY HOST .1.3.6.1.4.1.9.9.96.1.1.1.1.10

3740
Views
10
Helpful
3
Replies