hey ,i configured a chanalized STM-1 on 7609-s router with no problem,the think is when i configured on ASR 1006 it's not the same result of interfaces maybe because 1006 run IOS 15,i try to un derstand how it work
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version
After a long analyse ,i remarque that the 1006 IOS work fine,but only in the running config it sort the result in difirent way then IOS 12.4 , i don't know if it's a bug or something else.have a nice day.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...