Cisco Community

ucs 6454 40G uplinks to core and port channels

hi i am trying to cable up trhe ucs 6454. I got 2 40G mopdules on port 53 and 54 on each fabric. I got 2 core switches to connect therm to FABRIC 1port 53 ----> port 1 on Core switch APort 54 -----> port 1 on Core Switch BFABRIC 2port 53 ------> port...

How to delete a previous joined ise node from Cisco ISE Node?

I did join ise1 as a join point on Cisco ISE GUI, and then deleted it, but now I want to rejoin it, but an error message showed up telling me that : "Resource with this name is already configured in DataBase."======> How to definitly delete it ? and...

Call Handler Not Reachable From Outside Call

Hi Experts,I am sitting with an unique issue where my Auto Attendant works perfectly from inside the office, however it is not reachable from external calls.Connection ISP > SIP > CUBE > SIP > CUCMWhat I am seeing is as soon as I direct the call to C...

Integrate on-premises Firepower 8350 with FMCv300 AMI

Hi all, is there any restriction when I integrate Firepower 8350 with FMCv300 AWS Machine Image? the FMCv300 firmware version is 7.4.1-172, but the Firepower firmware version is 6.x. Additionally, If I wanna configure HA between FMCv300, is it possib...

8851 Kem

Dear Sir i am new to 8851 ip phone , just need help for speed dial kem i do program speed dial entries into the device and when the phone is turned off the entries are lost is there is any advice why list is forgotten from the phone ? thanks

How to combine multiple ikev2 proposal in to single policy

Hi Team,Our Router having many ikev2 proposal, as per TAC suggestion we need to combine in to single policy. Please let me know for this activity any down time needed ?

What does "2 Gigabit Ethernet combo + 2 SFP" mean in this context?

I think that it means 2 ports are support RJ45 and and also SFP. But how can a RJ45 support SFP?

Help with routing vlans

Can someone tell me how do I do routing here ? it does not matter if it is static or dynamic I just want to ping same vlans and also I dont want to have different vlans to be pinged

copy xmodem initializing no transfer c2960

Hi Guys, i had this problem for 8 hours now and can't seem to get it cracked... after i input the command copy xmodem: flash:c2960-lanbasek9-mz.152-7.e9.binand using the SecureCRT going to Transfer > send xmodem I get this and after that nothing happ...

Pseudowire over XRd not working?

Hi, We´ve been using XRd as a way to do integration testing with our autoprovisioning platform using gnmi.This works great.However I'm currently trying to do end to end testing of the whole solution with actual traffic forwarding across the finished ...

disruption of vpc heartbeat connection

want to move the vpc heartbeat connection of a N9K pair from a L2 switch to a direct cable.To my understanding -as long as the peer link is up- a disruption of the heartbeat link should not affect any traffic to the connected hosts.Is this correct? O...

DHCP relay with NAT, DHCP server sending DHCPOFFER to wrong IP

I configured NAT and DHCP relay in GNS3, and all hosts have end-to-end reachability, I can ping PC44 from PC11 and PC22, and also from PC33 if I configure a static IP address.On the NAT router (R11), I also configured DHCP relay with 'helper-address'...

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

Empowering Sustainability with Cisco and adidas

Community Activity