There's a mobile version of our website.
I manage lot of router and switch my problem is before I do any changes to configuration file I want to save a copy of it
if I do sh run using putty it just displays one page worth of information and I have to do copy paste one page at a time
is there any easier method to copy paste entire running config to a text file ?
enable session> logging in putty using connection properties
term len 0
in this way all the file is placed without need to press for next page
then you stop logging and you have your file.
to have again pages type:
term len 25
putty saves an header with date and time at the beginning after that you have clean text file.
Hope to help
Another option would be to send either the startup or running config to a TFTP, FTP or RCP server. The file will be text, although believe sequence of LFCR confuses Windows' Notepad but Wordpad renders it correctly.
<p>If you use secure crt</p>
<p>go to file then click on log session then save the file with .txt extension</p>
<p>thay way your config file will be saved in text format</p>
<p>hope that helps</p>
You can also use the following command from command prompt:
telnet -f fileName.txt x.x.x.x(IP)
Now everything that you do during this telnet session will be recorded in fileName.txt.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion