There's a mobile version of our website.
i would like to upgrade catalyst 2950 with current IOS image c2950-i6k2l2q4-mz.121-22.EA7.bin. But there is no command (archive download-sw) in current IOS. When I type "archive ?" i just get "tar List or extract files in a tar image" but in Configuration Guide here
http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_guide_chapter09186a00804762a2.html#wp1086981 it says just the opposite. Any idea?
Thanks for reply.
Since your using a bin file, you can use the following command;
copy tftp://<server ip>/c2950-i6k2l2q4-mz.121-22.EA7.bin flash:
This will probably erase flash first (it will only if there is not enough room for both images), then copy the image over. Don't forget to reload to 'load' the image.
HTH and please rate.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion