There's a mobile version of our website.
How to change ip address in cisco 2960 series switch?
Switch(config)#interface vlan 1
Switch(config-int)#ip address 192.168.1.5 255.255.255.0
I'm assuming your changing VLAN1's IP, so if you use a different one for management, go to that interface. Once you hit enter the change takes place immediately. You will then need to connect to the new address and save the config. You may also have to change the ip default-gateway. It's best to make these changes from the console.
Hope that helps.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion