There's a mobile version of our website.
I am new to cisco catalyst switches.I need to change hostname for one of cisco catalyst swich.How do i do that.Can some one provide me the steps for this and what precautions i need to take for this.
Thanks for your help
If it is high end switch hving CATOS like 4k,5k or 6k switch then the command will be "set prompt <name>"
You can use "set system name <name>" command to assign a name to the switch.
For an catlst IOS base switch the command to configure the system name for the switch is "hostname <name>" on global config mode and to configure system prompt command will be "prompt <name>" on global config mode.
Have a look at this link
HTH, if yes please rate the post.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion