There's a mobile version of our website.
Does the ip multicast boundary command work in both directions i.e in and out?
Yeah, it works in both directions. Check
Use this command to configure an administratively scoped boundary on an interface to filter multicast group addresses in the range defined by the access-list argument. A standard access list defines the range of addresses affected. When this command is configured, no multicast data packets are allowed to flow across the boundary from either direction.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion