There's a mobile version of our website.
I have a Linksys/Cisco BEFSR81 cable/DSL router with 8 port switch. I need to add wireless capability to the system so I can connect up to 11 computers in my home. Is it possible to attach a Cisco WRT400N dual band wireless N router to one of my ports on the BEFSR81?
If this is possible, would there be anything else I need to do to make this happen. This will allow all of our computers and laptops to share the internet connection.
You should be fine.
I would set a static ip address on the wireless router with a default gateway of the DSL modem, you could also hard code the duplex and speed on both sides, because your using a N router which is probably 1000MB and the Cisco DSL modem is most likely 100MB.
HTH, please rate below if so.
Login to share your discussion activity with your friends on Facebook. You can control what you share and turn off sharing anytime.
Your Facebook friends can now see that you have started this discussion
Your Facebook friends can now see that you have commented on this discussion
Your Facebook friends can now see that you have read this discussion